Causes and Solutions for Hydraulic Oil Overheating in Rotary Drilling Rigs

Hydraulic oil overheating is a common issue in rotary drilling rigs, tracked pile drivers, small rotary drilling rigs, and long spiral drilling rigs. Excessive oil temperature can reduce machine performance, damage components, and shorten service life. The causes can be grouped into two main categories: slow heat dissipation and rapid heat generation .

Causes of Hydraulic Oil Overheating

1. Slow Heat Dissipation

Insufficient radiator fan power reduces heat dissipation.

Hydraulic oil fails to circulate properly through the radiator.

Blockages in radiator channels obstruct oil flow.

Dust accumulation on the radiator exterior hinders cooling.

High ambient temperatures or prolonged operation under direct sunlight.

2. Rapid Heat Generation

Clogged inlet filters increase resistance and heat.

Hydraulic oil with inappropriate viscosity generates excess heat.

Poor sealing of the hydraulic oil tank leads to leaks and overheating.

Blockages in the hydraulic pipelines reduce flow and increase temperature.

Severe wear or internal leakage of the hydraulic pump.

Leaks at the hydraulic pump inlet pipe.

Solutions to Hydraulic Oil Overheating

1. Radiator Maintenance

Clean radiator fins and air ducts to remove dust and blockages.

Check fan speed and system pressure; repair or replace faulty sensors or components.

Upgrade the radiator from a tube-fin to a plate-fin type to increase heat dissipation area.

Ensure proper sealing between the radiator, engine, and counterweight to prevent hot air recirculation.

Add heat shields to prevent engine heat from affecting the hydraulic oil tank.

2. Hydraulic System Adjustments

Replace check valves or adjust back pressure to ensure oil flows through the radiator.

Inspect and clear bent fins or blocked passages to reduce air resistance.

Use hydraulic oil with the correct viscosity and high-quality anti-foaming properties to reduce heat generation.

3. Component Repairs and Upgrades

Replace worn main pumps, plunger assemblies, or distributor valves.

Wrap the hydraulic oil tank with heat-insulating pads.

Adjust engine speed to reduce heat input to the hydraulic system.

Modify engine pulley size to increase air intake and ventilation.

4. Operational Precautions

Avoid prolonged operation under extreme ambient temperatures.

Regularly inspect and maintain the hydraulic system to prevent wear and blockages.

Monitor hydraulic oil temperature continuously and adjust operation parameters accordingly.

By addressing both the causes of slow heat dissipation and rapid heat generation, operators can maintain optimal hydraulic oil temperatures, ensuring safe and efficient operation of rotary drilling rigs.

Shandong Liqiang Machinery Co., Ltd. provides further guidance and technical support for maintaining and troubleshooting hydraulic systems.

Notícias