Mini Excavators from 1.3 m to 2.2 m: How to Choose Among Five

Five mini excavators side by side dig to 1300 mm, 1780 mm, 1800 mm, 1800 mm and 2200 mm. The deepest one runs 11.8 kW, while the 1780 mm machine carries 29 kW. Depth and power are not the same curve, so picking depth by power goes wrong quickly.

ME08 is the smallest of the group: 1300 mm digging depth, 2430 × 720 × 1390 mm overall, 7.6 kW, 6.5 kN bucket digging force. The 720 mm body width is what gets it through most indoor renovation and narrow-lane clean-up sites.

ME16 pushes depth to 1800 mm: 2870 × 1000 × 2230 mm, 1745 mm dump height, 2580 mm maximum digging height, 11.5 kN bucket force. Against ME08 that is 500 mm more depth, 280 mm more width and 5 kN more bucket force.

XZ18 matches ME16 almost line by line: 1800 mm depth, 7.6 kW, 11.5 kN bucket force and 1745 mm dump height. The difference sits in the 2870 × 1100 × 2300 mm body — 100 mm wider and 70 mm taller. There is no performance trade-off, only an access one.

ME18-2 is the outlier: 1780 mm digging depth, the same class as ME16, but 29 kW rated power, 1230 kg operating weight, 0.03 m³ bucket, 350 mm bucket width and a 3200 × 1200 × 2350 mm body. Same depth class, 21.4 kW more power.

ME25 reverses it: 2200 mm depth on 11.8 kW, 2000 kg operating weight, 0.05 m³ bucket, 20 kN bucket force, 3250 × 1300 × 2400 mm overall. It digs 420 mm deeper than ME18-2 with 17.2 kW less power.

Put the five numbers together and the pattern is plain: depth follows the boom and undercarriage, power follows hydraulic and attachment demand. They vary independently, so selection should not start with the power column.

Step one is depth. 1300 mm covers shallow trenches and indoor breaking and removal; 1800 mm covers common utility trenches and orchard work; 2200 mm covers deeper drainage and planting trenches. This is a depth tier, not a substitute for project specifications.

Step two is dump height: 1600 mm, 1745 mm, 1745 mm, 1650 mm and 2300 mm in model order. It decides whether spoil reaches the trench edge or a truck bed directly instead of being handled twice.

Step three is access. Overall widths come in five tiers — 720 mm, 1000 mm, 1100 mm, 1200 mm and 1300 mm — with heights of 1390 mm, 2230 mm, 2300 mm, 2350 mm and 2400 mm. Measure the doorway, lane and headroom first, then match a model.

Step four is power and bucket. The three 192F machines share 7.6 kW and 0.499 L; ME18-2 runs a Laidong 385 at 29 kW with a 0.03 m³ bucket; ME25 runs a Kubota D902 at 11.8 kW and 0.89 L with a 0.05 m³ bucket.

Only the three 192F machines publish fuel consumption: 275 g/kWh. The ME18-2 and ME25 sheets do not list it; fuel tanks are 5.5 L on the 192F machines and 9.5 L on the ME18-2.

Travel data is on the sheets as well: 0-2.5 km/h on ME08, ME16 and XZ18, 0-1.8 km/h on ME18-2 and 0-3 km/h on ME25, with 30° gradeability — a row the ME18-2 sheet does not carry.

So on a fixed budget the model eliminated first is usually not the least powerful one, but the one that cannot enter the site. Where access is open and depth is fixed, power and bucket size become the real variables.

Send the required depth, dump height and access width, and the choice narrows to one or two models. Full figures are on each model page, identical across the six language versions.

Noticias